Elmer’s Rod Builder’s Cork Filler Grip Making

This great new filler works excellent on all kinds of cork grips and can be used to repair & recondition otherwise sorry looking handles. 3.25 fluid ounces.

• Sands easily to a smooth finish
• Resists shrinking + cracking
• Easy water clean-up
• Solvent free
• Must be used with Cork Seal (U403)

Preparation:
Surface must be clean & dry. Cork, filler & air temperature should be above 40°F.

Filling:
Apply to cork pits and grooves with a spatula, putty knife or similar tool. Remove excess. Deep repairs may need 2 or more fillings.

Sanding:
Sand shallow repairs after 15 minutes. Deep repairs after 2-8 hours. Use medium grit sand paper.

Finishing:
Before filling, test stain on scrap cork with filler. Apply cork seal or other finish after 24 hours.